 |
|
|
|
I'm Online Chat Now
Certification
KSD9700 BK05 Thermostat Plastic shell 40C Normally closed Thermal switch
|
Product Details:
Payment & Shipping Terms:
|
Detailed Product Description
| Name: | Thermal Cutoff Switch | Model: | BK05-A |
|---|---|---|---|
| Contact Type: | Normally Closed Or Normally Open | Temperature Range: | 50-150℃ |
| Case: | Metal | Rated Volts & Amps: | 250V AC 5A/10A |
| Certificate: | CQC, UL ,TUV | Lead Wire: | UL3135 AWG18, AWG20, AWG22, Or Customized |
| Life Cycle: | 10,000 Cycles | Lead Wire Length: | L1=L2=70mm(standard), Can Be Customized |
KSD9700 Temperature Controller Switch, H20 Thermal Cutoff Fuse 250V 5A 10A 50-150 Deg C
Quick Detail:
| Model | BK05-A |
| Reset Type | Auto Reset |
| Single Pole,Single Throw(SPST) | |
| Case Material: | Plastic or Metal |
| Rated Voltage & Current | 250V AC 5A/10A |
| Contact Type | Normally Closed(Open on Rise) or Normally Open(Close on Rise) |
| Operating Temperature Range | 45～150℃ |
| Temperature tolerance | ±5.0℃ |
| Contact Resistance | ≤50mΩ |
| Insulation Resistance | ≥100MΩ |
| Dielectric Strength | ≥1500V |
| Life Cycle | 10,000 Cycles |
| Certificate | CQC,TUV,UL,VDE,ROHS,REACH |
1 Product application:
BK05-A thermal protector has the characteristics of small volume, insulation of Shell, sensitive action, long service life and so on, and is widely used Suitable for split horsepower motor, light ballast, transformer, Automobile Motor, integrated circuit and general electrical equipment Double protection of overheating and overcurrent.
2 Structural features:
BK05-A series of thermal protectors are bimetallic sheets with a certain geometric shape, without auxiliary mechanism, only relying on the self-contained bimetallic sheets Body temperature and current thermal effect make the state of bimetallic components change rapidly, and directly drive the contact to realize automatic cut-off and connection. Circuit, plays a role in overheating and overload protection.
3 Structural Drawing
|
| No. | Name | Material | Qty |
| 1 | Case | PBT | 1 |
| 2 | Moveable spring piece | Beryllium bronze | 1 |
| 3 | Bimetallic strip | BR-1 | 1 |
| 4 | Moveable contact | AgNi10/Cu | 1 |
| 5 | Sealing | Epoxy resin | Few |
| 6 | Lead wire | 0.75mm² black silicon wire | 2 |
| 7 | Base | Brass H62 | 1 |
| 8 | Stationary Contact piece | AgNi10/Cu | 1 |
| 9 | Insulation blcok | PBT-VG30 | 1 |
| 10 | Tinning | Tin | Few |
|
|
|
|
4 Product appearance
Plastic case: 15mm × 6.5mm × 3.1mm The shell of the thermal protector shall not have burrs, cracks, deformation, corrosion and other phenomena; The logo should be correct, correct, clear and durable;
5 Product Performance
5.1 Rated current (COS =0.7) DC24V-10A, AC250V-5A 5.2 Disconnect temperature: 30℃ ~ 150℃ Reset temperature: 20℃ ~ 110℃(see the drawing for details). 5.3 Tensile test: the lead end of the product should be able to withstand tension greater than or equal to 20N, and the wire will not break or slip out. 5.4 Insulation voltage: a. The product should be able to withstand AC660V between the leads at the time of disconnection, lasting for 1min without breakdown and flashover phenomenon; b. The product can withstand AC1800V between the lead and the insulating shell for 1S without breakdown and flashover phenomenon; 5.5 Insulation resistance: Under normal conditions, the insulation resistance between the lead wire and the insulation housing should be more than 100MΩ. 5.6 Contact resistance: The contact resistance of the product shall not be greater than 50mΩ. 5.7 High temperature resistance test: The product is placed in the air environment above the rated operating temperature of 50℃ for 96h. 5.8 Low temperature resistance test: The product is placed in -40℃ air environment for 96h. 5.9 Anti-vibration test: the thermal protector should be able to withstand the amplitude of 1.5mm, the frequency change of 10 ~ 55Hz, the scanning change cycle of 3 ~ 5 times /min, Vibration direction X, Y, Z, each direction of continuous vibration for 2h. 5.10 Drop test: The product falls freely once from a height of 0.7m. 5.11 Compression test: The product should be able to withstand 100N static pressure for 1min. After 5.7,5.8,5.9,5.10 and 5.11 tests, the following conditions should be met: a. The change of disconnection temperature should be within +7℃ of the initial value; b. Contact resistance should be less than 100mΩ; c. The shape should have no obvious deformation; d. The conductor has no cracking damage.
6 Service Life
Under the condition of rated voltage, current and power factor of 0.7, the product is operated 4000 times by an external heat source, and the following conditions should be met: a disconnect temperature change should be within the initial value of +5℃; b Contact resistance should be below 50mΩ; c Continue the test to 6000 times can move.
7 Other Matters:
7.1 The heating rate of the disconnected temperature detection should be controlled as 1℃/1min; 7.2 The product cannot bear strong impact force and compression force during use;
Heat protector effect diagram: product model, operating temperature, certification mark, etc. are shown in the following figure.
Competitive Advantages:
8 Thermal protector action reset temperature reference table
Tag:
Snap-action Thermostat, Resetable Thermal Cutoff Switch, Temperature Cutoff Switch
Contact Details
Dongguan Yusheng Electronics Co., Ltd.
Contact Person: Ms. Amy Li
Tel: 86-13553890655
Fax: 86-769-82869802
Send your inquiry directly to us
More Thermal Cutoff Switch
-
H21 Large Current Metal Case Motor Thermal Overload Temperature Protection Temperature Cutout Switch
-
KSD9700 Temperature Controller Switch, H20 Thermal Cutoff Fuse 250V 5A 10A 45-150 Deg C
-
Miniature 5A Overheat Protection Thermal Cutoff Switch For Battery Packs
-
125 Deg C BK05-BB1D Thermal Cutoff Switch , Bimetal Temperature Switch
-
Small Size 130 Deg C BK05-BB1D Bimetal Thermal Protector With UL TUV
-
Bi Metal 65 Deg C BK05-BB1D Micro Thermostat Cut Off Switch Temperature Switch