|
|
Product Details:
Payment & Shipping Terms:
|
Model: | KSD9700 | Rated Volts & Amps: | 250V AC 5A/10A |
---|---|---|---|
Contact Type: | Normally Closed Or Normally Open | Life Cycle: | 10,000 Cycles |
Temperature Range: | 40-150℃ | Lead Wire: | UL3135 AWG18, AWG20, AWG22 |
High Light: | thermal overload protector,motor thermal protector |
45C KSD9700 Bimetal Thermal Protector for Automatic Fire-extinguishing System
Quick Detail:
Model | K9700 |
Reset Type | Auto Reset |
Single Pole,Single Throw(SPST) | |
Case Material: | Plastic or Metal |
Rated Voltage & Current | 250V AC 5A/10A |
Contact Type | Normally Closed(Open on Rise) or Normally Open(Close on Rise) |
Operating Temperature Range | 45~150℃ |
Temperature tolerance | ±5.0℃ |
Contact Resistance | ≤50mΩ |
Insulation Resistance | ≥100MΩ |
Dielectric Strength | ≥1500V |
Life Cycle | 10,000 Cycles |
Certificate | CQC,TUV,UL,VDE,ROHS,REACH |
Description:
Model KSD9700Bimetal Thermal Protector is composed of high sensitive disk-shaped bimetallic element,moveable contact,static contact plate, fixed baseplate, moveable spring plate, case and temperature resistance lead wire.The bimetallic strip is fixed on the baseplate, which can maintain the consistency of disconnection and reset temperature after long-term use. Its main working principle is to control the temperature by opening or closing the bi-metal strip. It stays at normally closed/normally open status, it opens/closes when temeprature rising and closes/opens when temperature decreasing.It protects the device overheating and burning out. At normal temperature, the moveable contact and the static contact are in the closed state, the circuit is on.When the use of electrical failure, the temperature rise to the rated disconnect temperature value of the product, the bimetal element heat produced internal stress rapid action, it push the contact and cut off the power supply, then the electrical appliances stop working, so as to play a protective role.When the temperature of the protected appliance drops to the safe temperature, switch on the power again and the appliance resumes working.
Specifications:
1. Dimensional Outline
2. Structural Drawing
Plastic Case Type | Metal Case Type |
2. Epoxy Resin 3. Stationary Contact Plate 5. Movable Spring Plate 7. Plastic Case 8. Insulation Block 9. Baseplate |
1. Lead 2.Epoxy Resin 3. Stationary Contact Plate 4. Movable Contact 5. Movable Spring Plate 6. Bimetallic Strip 7. Metal Case 8. Insulation Block 9. Baseplate 10. Insulating Tube |
|
|
3. Action Temperature Table
KSD9700 | |||||||||
Action Temperature | Reset Temperature | Action Temperature | Reset Temperature | ||||||
40±5℃ | ≥27℃ | 110±5℃ | 73±15℃ | ||||||
45±5℃ | ≥27℃ | 110±5℃ | 73±15℃ | ||||||
50±5℃ | ≥30℃ | 115±5℃ | 76±15℃ | ||||||
55±5℃ | ≥30℃ | 120±5℃ | 80±15℃ | ||||||
60±5℃ | 40±15℃ | 125±5℃ | 83±15℃ | ||||||
65±5℃ | 43±15℃ | 130±5℃ | 86±15℃ | ||||||
70±5℃ | 46±15℃ | 135±5℃ | 90±15℃ | ||||||
75±5℃ | 50±15℃ | 140±5℃ | 93±15℃ | ||||||
80±5℃ | 53±15℃ | 145±5℃ | 96±15℃ | ||||||
85±5℃ | 56±15℃ | 150±5℃ | 100±15℃ | ||||||
90±5℃ | 60±15℃ | ||||||||
95±5℃ | 63±15℃ | ||||||||
100±5℃ | 67±15℃ | ||||||||
105±5℃ | 70±15℃ | ||||||||
Remark : | |||||||||
Reset Temperature: 2/3 of Action Temperature, tolerance is±15℃ or customized. |
Applications:
electric motor, transformer, recahrgeable battery, fan motor, conditioner motor, washing machine motor,
electric blanket, water pump motor, clothes dryer motor, transformer, ballast, power tools, microwave motor,
lampblack motor, rechargeable battery, liminator, heating pad, automatic fire-extinguishing System, etc.
Competitive Advantage:
1. Small size and expedient installation
2. High temeprature resistance
3. High reliability
4. High sensitivity
5. Low contact resistance
5. Long life cycles
6. ROHS compliant
7. Wide application
8. Anti-vacuum dipping process, can be dipped with the motor
9. Can be customized
Tag:
Thermal Cut-out, Overload Protector, Overheat Protector, Temperature Switch, Temperature Cutoff Switch,
Thermal Cutout Switch, Temperature Controller, Bimetal Thermal Protector Switch, Motor Protector,
Contact Person: Ms. Amy Li
Tel: 86-13553890655
Fax: 86-769-82869802